This process includes the oil extraction phase and the surface processing phase. It covers methane emissions (fugitive emissions, flaring) in specific regions, produced water discharge, and direct energy use during oil production, including drilling, oil pumping, steam injection, and flaring. Flaring refers to the practice by oil and gas enterprises of transporting combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. Additionally, emissions from spills associated with drilling and pumping operations are included in this inventory, although crude oil leaks related to transportation and refining are not included. The production of crude oil and natural gas is often closely related, requiring material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to those where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Due to their high viscosity and poor fluidity, heavy oil reserves are difficult to extract. A heavy crude oil field with <70% water cut means that the water content in the produced well fluid is below 70%; this provision assumes a water cut of 60%. The net calorific value of crude oil is 43.4 MJ/kg, with an average heating value of natural gas at 36 MJ/Sm³. Modeled using representative data on production technologies that reflect the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information as of 2023.